"¬P»õ¹ê·~,¤­ª÷,¤Á«d,¬P»õ,TANOI,¥Ð³¥¤«,µL®hÀ½À£µ·§ð,µ·§ð,T¨t¦CÁ³±Û,T¨t¦C¥ýºÝµ·§ð,Á³¯¾,¤Á«d¤u¨ã,Ĭ¤óÆpÀY,»Ñ¤M,¤ú³W,Àô¤ú³W,KTD,¤é¥»ª÷´Ë,YSK,¤s¥»ºë¤u,¤p®|,°ª³tÆpÀY,STD,»ôÃÃ,¤£ù׿û,¥ª±Û,¯S®íºë±KÆpÀY,SRC,¤é¥»·s¦a,¤âµ±¤M,T&J,¾÷±ñµ±¤M,Á³±Ûµ·§ð, ¥ýºÝµ·§ð, ¥[¤jµ·§ð, ÁáÜgµ·§ð, µL®hµ·§ð, ¸õ¤úµ·§ð, ºÞ¤úµ·§ð, ²kÂë¿ûµ·§ð, ¤bÂë¿ûµ·§ð, ¥ª±ÛÆpÀY, ²`¤ÕÆpÀY, »É, ¾TÆpÀY, ¤p®|ÆpÀY, »Ñ¤M¬`ÆpÀY, ¤£ù׿û¥ÎÆpÀY, ©w¦ìÆp, ·L«¬µ·§ð,Á³¯¾»Ñ¤M"
           
 
       
 
   
    ²£«~¦Cªí
   
   
   
    ¥xÆWĬ¤óÆpÀY¨t¦C
    ­^°êT&J»Ç¤M¨t¦C
    ¤é¥»STDÆpÀY¨t¦C
    ¤é¥»YSKÆpÀY¨t¦C
    ¤é¥»KTD¨t¦C
    ¤é¥»SRCµ±¤M¨t¦C
    YCT¬Õ¹Å»Ñ¤M¨t¦C
    ¥xÆW¤T¬P¤ú³W¨t¦C
    ¤é¥»ATOMÆpÀY¨t¦C
 
µ·§ð
ÆpÀY
¤ú³W
»Ç¤M
Á³¯¾»Ñ¤M
­Ë¨¤¤M
¾@ªî¤u¨ã
¤Á«dªo¾¯
 
¤é¥»TANOI¨t¦C Home > TANOI²£«~¦Cªí > À½À£µ·§ð
À½À£µ·§ð (¬P»õ¹ê·~ www.sing-yi.com.tw)
 
ITÀ½À£µ·§ð-T IT TAFLET-T °O¸¹ : IT-TF-T §÷½è : HSSE
®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z
M3-M6 2¤ú 4¤ú TiCN

­Ë¤ú³¡ªºÁ³¶Z©M¨¤«×µL»~®t¡A¨¦©³¤£¶É±×ªºÀ½À£«¬µ·§ð¡C¥Ñ©ó¨¦©³«Ü²L¡A©Ò¥H¤£®e©ö§éÂ_¡A¦Ó¥B§í¨î¤FÀhŽ©M¤ò¨ëªºµo¥Í¡A´£°ª¤F°ª³t§ð¤úªº©Ê¯à¡C±q§CºÒ¿û¨ì¤£ù׿û¡A¾A¦X¥þ³¡«DÅK¦Xª÷ªº¥[¤u¡C(¬P»õ¹ê·~ www.sing-yi.com.tw)(¬P»õ¹ê·~ www.sing-yi.com.tw)
This forming tap is free pitch/angle errors in the chamfer, and its chamfered threads have flat roots. The shallow root design minimizes likelihood of tap breakage,prevents burrs, and improves high-speed tapping performance. Suitable for processing low-carbon steels, stainless steels, and nonferrous alloys in general.

ITÀ½À£µ·§ð-C IT TAFLET-C °O¸¹ : IT-TF-C §÷½è : HSSE

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M1-M6

1¤ú 2¤ú

C

­Ë¤ú³¡ªºÁ³¶Z©M¨¤«×µL»~®t¡A¨¦©³¤£¶É±×ªºÀ½À£«¬µ·§ð¡C¥Ñ©ó¨¦©³«Ü²L¡A©Ò¥H¤£®e©ö§éÂ_¡A¨Ã¥B§í¨î¤FÀhŽ©M¤ò¨ëªºµo¥Í¡A´£°ª¤F°ª³t§ð¤úªº©Ê¯à¡C¾A¦X©ó°ªºÒ¿û¡A¦Xª÷¿û¡A½Õ½è¿û¡A¤£ù׿ûªº¥[¤u¡C(¬P»õ¹ê·~ www.sing-yi.com.tw)(¬P»õ¹ê·~ www.sing-yi.com.tw)
This forming tap is free from pitch/angle errors in the chamfer¡Aand its chamfered threads have flat roots¡DThe shallow root design minimizes likelihood of tap breakage¡A prevents burrs and improves high-speed tapping performance¡DSuitable for processing high-carbon steels¡Aalloyed steels¡Ahardned steels and stainless steels¡D

ITÀ½À£µ·§ð-T-·L«¬¤ºÁ³¯¾¥Î IT TAFLET-T for Miniature Threads °O¸¹ : IT-TF-T §÷½è : HSSE

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M1-M6

1¤ú 2¤ú

TiCN

ITÀ½À£µ·§ð-Tªº·L«¬¤ºÁ³¯¾¥Îµ·§ð¡A¬O¬°ÄÁ¿ö¡A¥ú¾Ç»ö¾¹¡A¹q®ð¾÷¾¹¡A´ú¶q»ö¾¹µ¥¨Ï¥Îªº·L«¬¤ºÁ³¯¾ªº°ªºë«×¥[¤u¦Ó¶}µo¥XªºÀ½À£µ·§ð¡C(¬P»õ¹ê·~ www.sing-yi.com.tw)
This forming tap in the IT TAFLET-T series is for miniature threads¡DIt was developed for high precise tapping of miniature threads found timepieces¡Aoptical instruments¡Aelectrical equipment¡Ameasuring instruments¡Aetc¡D

ITÀ½À£µ·§ð-C-·L«¬¤ºÁ³¯¾¥Î
IT TAFLET-C for Miniature Threads
°O¸¹ : IT-TF-C §÷½è : HSSE

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

ªñ´Á¾P°â

1¤ú 2¤ú

C

ITÀ½À£µ·§ð-Cªº·L«¬¤ºÁ³¯¾¥Îµ·§ð¡A¬O¬°ÄÁ¿ö¡A¥ú¾Ç»ö¾¹¡A¹q®ð¾÷¾¹¡A´ú¶q»ö¾¹µ¥¨Ï¥Îªº·L«¬¤ºÁ³¯¾ªº°ªºë«×¥[¤u¦Ó¶}µo¥XªºÀ½À£µ·§ð¡C(¬P»õ¹ê·~ www.sing-yi.com.tw)
This forming tap in the IT TAFLET-C series for miniature threads¡DIt was developed for high precise tapping of miniature threads found in timepieces¡Aoptical instruments¡Aelectrical equipment¡Ameasuring instruments¡Aetc¡D

µLÁ_À½À£µ·§ð Seamless TAFLET °O¸¹ : SL-TF §÷½è : HSSE

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M2-M10

2¤ú

TiCN

¥Ñ©óµ·§ðªº­Ë¤ú³¡±a¦³°¼­±¥ß»Ñ¤M¡A©Ò¥H¦b°fÂà®É¥i¥H§ð¥X¨ã¦³§¡¤@ªº¡A¤£°¾¤£­Êªº¤º®|¤Ø¤oªº¤ºÁ³¯¾¡C (¬P»õ¹ê·~ www.sing-yi.com.tw)(¬P»õ¹ê·~ www.sing-yi.com.tw)
Forming tap which finishes uniform and impartial minor diameter of the internal thread¡Aduring reverse rotation with a Side End Mill furnished in the tap`s chamfer

ªø¬`«¬ µLÁ_À½À£µ·§ð Seamless TAFLET Long shank °O¸¹ : LT-SL-TF §÷½è : HSSE

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M3-M10

2¤ú TiCN

µLÁ_À½À£µ·§ðªºªø¬`«¬¡C (¬P»õ¹ê·~ www.sing-yi.com.tw)(¬P»õ¹ê·~ www.sing-yi.com.tw)
Seamless TAFLET with long shank¡D

µL¤ò¨ëÀ½À£µ·§ð Burrless TAFLET °O¸¹ : BL-TF §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M1.4-M4

4¤ú TiCN

µ·§ðªº¨¦©³®|»P¤ºÁ³¯¾ªº¤Ø¤o¬Û§k¦X¨Ã¥B«Ü²L¡A¤ú³»³¡³Q§¹¥þÀ½À£¡A¨¾¤î¤F¤ºÁ³¯¾¤º®|ªºÀhŽ©M¤ò¨ëªºµo¥Í¡A¥i®ø°£¤F©ö¤Þ°_¾÷¾¹¬G»Ùªº¤ú³»³¡Á_»Øªº°ÝÃD¡C
By shallowing the tap root diameter accord with the minor diameter of the internal thread¡Athe forming tap will top roll throughout the thread portion¡Apreventing burrs in the minor diameter of the internal thread¡Aand eliminating seams (which cause thread matching errors)¡D

T¨t¦CÀ½À£µ·-¤£ù׿û¥Î TAFLET for Stainless Steel °O¸¹ :T-TF-SUS §÷½è : HSSE

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M1.4-M12

2¤ú 4¤ú C

¨ã¦³¶ê§Î¤ú³»³¡ªºÀ½À£µ·§ð¡A¨Ï¶ì©Ê¬y°ÊÅܱo§ó¶¶ºZ¨Ã¯à¨¾¤î¤ºÁ³¯¾¨¦©³³¡ªºÀtµõ©M¤ò¨ëµo¥ÍªºÀ½À£µ·§ð¡C³Ì¾A¦X©ó¤£ù׿ûµ¥¥[¤u­t²ü¤jªºÃø¤Á«d§÷¡C
This forming tap has rounded tap crests¡Aenabling smooth plastic flow and preventing cracking/burrs in the root of the internal thread¡DSuitable for hard-to-cut materials which have high machining loads as well as for stainless steels¡D

T¨t¦C À½À£µ·§ð T TAFLET °O¸¹ : T-TF §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M1.4-M10

2¤ú 4¤ú TiCN

¸g¹LTiCNªí­±³B²z¡A´£°ª¤F­@¿i¯Ó¡A©Ê­@·»µÛ©Ê¡A¾A¦X±qÅKÃþª÷Äݨì«DÅKª÷Äݪº¼sªx½d³ò¤ºªº³Q¤Á«d§÷®Æ¨Ï¥Î¡C
This forming tap has rounded tap crests¡Aenabling smooth plastic flow and preventing cracking/burrs in the root of the internal thread¡DSuitable for hard-to-cut materials which have high machining loads as well as for stainless steels¡D

ÁáÜgÀ½À£µ·§ð TiN Coating TAFLET °O¸¹ : TiN-TF §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M1.4-M24
No.2-U1"
W1/8"-W1"

2¤ú 4¤ú TiN

¸g¹LTiN¶î¼h´£°ª¤Fµ·§ðªº­@¿i¯Ó©Ê¡A­@·»µÛ©Ê¡A­@¼ö©Ê¡A¬O¥i¥H¹ïÅKÃþª÷Äݶi¦æ°ª³t§ð¤úªºÀ½À£µ·§ð¡C( (¬P»õ¹ê·~ www.sing-yi.com.tw)( (¬P»õ¹ê·~ www.sing-yi.com.tw)
Forming tap coated with TiN for improved wear¡Agalling and heat resistance¡Aenabling high-speed tapping of steel workpieces¡D

¨RÀ£¥ÎÀ½À£µ·§ð TAFLET for Press °O¸¹ : PR-TF §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M1.4-M4

8¤ú HOMO

¬°¤F¨¾¤îÀhŽ¡A¤ò¨ëªºµo¥Í¦Ó±N­Ë¤ú³¡°µ¦¨¤F8­Ó¤úªø¡A¨Ã¥B±Nµ·§ð¤ú³»³¡ªº¦y¨¤¥[¤u¦¨¤F¶ê§ÎªºÀ½À£µ·§ð¡C±M¥Î©ó¹ï¥Î¨R§É©Î¥´¤Õ¾÷¦bÁ¡ªO¤W¥´¥Xªº¤Õ¶i¦æ§ð¤ú¡C
This forming tap has an 8-pitch chamfer length to prevent burrs¡DTap crests are rounded to leave no sharp edges¡DExclusively used for lightweight items whose holes are prepared by press or punch¡D

­Ë¨¤¤M¥Î À½À£µ·§ð TAFLET for Burr-mill °O¸¹ : BR-TF §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ

M3-M10

2¤ú 4¤ú

¸g¹L»P­Ë¨¤¤u¨ã­Ë¨¤¤Mªº²Õ¦X¨Ï¥Î¡A¨Ï§ð¤ú©M­Ë¨¤¦b¦P¤@¤u§Ç¤¤§¹¦¨ªºÀ½À£µ·§ð¡C ( (¬P»õ¹ê·~ www.sing-yi.com.tw)
Used in combination with the chamfering tool¡ÕBurr-mill¡Ö¡Athis forming tap can conduct tapping and chamfering in a single operation¡D

À½À£µ·§ð-L TAFLET-L °O¸¹ : TFL §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ

M1.4-M12
No.4-UI/4
SM1/8-SM15/64

2¤ú 4¤ú

¬OÀ½À£µ·§ð°Ý¥@¥H¨Ó´N¦³ªº°Ó«~¡A³z¹Lª÷Äݧ÷®Æªº¶ì©ÊÀ½À£¦Ó²£¥ÍÁ³¯¾¡C¥H«DÅK¦Xª÷¬°¤¤¤ß¡A¾A¥Î½d³ò¼sªx¡C ( (¬P»õ¹ê·~ www.sing-yi.com.tw)
A stock item in the original TAFLET range¡Athis basic forming tap creates threads by means of plastic flow¡DSuitable for a wide range of applications using nonferrous alloys.

ªø¬`À½À£µ·§ð-L TAFLET-L Long Shank °O¸¹ : LT-TFL §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ

M3-M10

2¤ú

À½À£µ·ªºªø¬`«¬¡C ( (¬P»õ¹ê·~ www.sing-yi.com.tw)( (¬P»õ¹ê·~ www.sing-yi.com.tw)
Long-shank TAFLET-L

À½À£µ·§ð-L-1¯Å¥Î TAFLET-L for Class 1 Screw Threads °O¸¹ : TFL §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ

¯S§O­q³f

2¤ú 4¤ú

À½À£µ·§ð-Lªº1¯Å¤ºÁ³¯¾¥[¤u¥Îµ·§ð¡C( (¬P»õ¹ê·~ www.sing-yi.com.tw)
TAFLET-L tap for tapping class 1 thread.

À½À£µ·§ð-S TAFLET-S °O¸¹ : TFS §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ

M1.4-M6
No.2-U1/4"
W1/8"-W1/4"

2¤ú 4¤ú

µ·§ðªºÁ³¯¾ªø«×¬°TFLªº60%¡A¬O¾A¦X¦³®ÄÁ³¯¾ªø«×µuªº¤ºÁ³¯¾¥[¤u¥Îªº¸gÀÙ«¬µ·§ð¡C¥H«DÅK¦Xª÷Ãþ¬°¤¤¤ß¾A¥Î½d³ò¼sªx¡C( (¬P»õ¹ê·~ www.sing-yi.com.tw)
Economical tap suitable for tapping internal threads with short effective thread length (60% of TFL)¡DSuitable for a wide range of applications using nonferrous alloys¡D

À½À£µ·§ð-S-1¯Å¥Î TAFLET-S for Class 1 Screw Threads °O¸¹ : TFS §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ

¯S§O­q³f

2¤ú 4¤ú

À½À£µ·§ð-Sªº1¯Å¤ºÁ³¯¾¥[¤u¥Îµ·§ð¡C( (¬P»õ¹ê·~ www.sing-yi.com.tw)
TAFLET-S tap for tapping class 1 thread.

À½À£µ·§ð-¿û¥Î TAFLET for Steels °O¸¹ : TFS-ST §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M1.4-M20
No.0-U1"
W1/8"-W1"

2¤ú 4¤ú HOMO /
µLHOMO

¾A¥Î©óHRC20¥H¤UªººÒ¯À¿û¡A¦Xª÷¿û¡A¤£ù׿ûªºÀ½À£µ·§ð¡C¸g¹LHOMO³B²zµo´§¤FÀu¶Vªº­@·»µÛ©Ê¯à¡C (¬P»õ¹ê·~ www.sing-yi.com.tw)
Forming tap suitable for alloyed steels¡Astainless steels and carbon steels of HRC 20 or less. Excellent galling resistance due to steam oxide treatment¡D

ªø¬`À½À£µ·§ð-¿û¥Î TAFLET for Steels Long Shank °O¸¹ : LT-TFST §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

M3-M10

2¤ú HOMO

À½À£µ·§ð-¿û¥Îªºªø¬`«¬¡C (¬P»õ¹ê·~ www.sing-yi.com.tw)
Long-shank TAFLET for steel.

µLÁ_À½À£Ås¬`¥ÎÁ³´Uµ·§ð Seamless TAFLET Bent °O¸¹ : SL-TF-B §÷½è : HSSV

®w¦s½d³ò ­Ë¤ú³¡¤ú¼Æ ªí­±³B²z

¯S§O­q³f

12¤ú TiCN

§@¬°Á³´Uµ·§ð±M¥Î¦Ó¶}µo¥XªºÀ½À£µ·§ð¡Cµ·§ðªº©³³¡±a¦³°¼­±¥ß»Ñ¤M¡A¥i¥H¦b§ð¤ú§@·~ªº¦P®É¤Á°£¤ºÁ³¯¾ªº¤º®|³¡¡A±q¦Ó¨Ï§å¶q¥Í²£¤º®|¤Ø¤o§¡¤@ªº¥ÀÁ³¯¾¦¨¬°¥i¯à¡C
Forming tap developed for nut tappers¡DA Side End Mill provided at the last thread¡Awhich cuts the minor diameter of the internal thread at the same time as the tapping process¡Aenables mass production of nuts of uniform minor diameter¡D

¦^­¶­±³»ºÝ   Home > TANOI²£«~¦Cªí > À½À£µ·§ð
 
         
 
¬P »õ ¹ê ·~ ªÑ ¥÷ ¦³ ­­ ¤½ ¥q
»OÆW¥x¥_»OÆW¥x¤¤
¬P»õ¹ê·~ª©Åv©Ò¦³ © 2007-2013 SINGYI All rights reserved.