| 复合型丝锥 Multi
Taps |
记号
: MLT |
材质
: 超硬合金 |
|
 |
库存范围 |
倒牙部牙数 |
| M3-M12 |
1.5牙
3牙 |
是能在压铸零件的铸孔里直接攻牙，丝锥的先端带有立铣刀、倒牙部的后部带有侧面立铣刀的硬质合金制的复合型丝锥。(星亿实业 www.sing-yi.com.tw)
Composite tap made of
cemented carbide，with an End Mill built onto
the tip，and a Side End Mill immediately following
the chamfered thread cutting teeth．This allows
direct tapping of molded holes in die-cast parts． |
|
| 复合型螺旋丝锥 Multi
Spiral Taps |
记号
: MLT-SP |
材质
: HSSE |
|
|
库存范围 |
倒牙部牙数 |
表面处理 |
| M3-M10 |
3牙 |
TiCN |
能在压铸零件的铸孔中直接攻牙，丝锥的先端带有立铣刀、倒牙部的后部带有侧面立铣刀，通过螺纹槽提高了切屑排出性能的高速工具钢制的复合型丝锥。
Composite tap made of
high-speed tool steel，whose spiral grooves improve
chip ejection．With an End Mill built onto the
tip，and a Side End Mill immediately following
the chamfered thread cutting teeth，the tap can
perform direct tapping of molded hoes in die-cast
parts． |
|
| 钻头挤压丝锥 Drill
TAFLET |
记号
: DR-TF |
材质
: HSSV |
|
|
库存范围 |
倒牙部牙数 |
表面处理 |
| M3-M12 |
2牙 |
CrN |
是挤压丝锥的先端带有加工下孔用的钻头的复合型丝锥、专用于通孔。使钻孔、倒角、攻牙、通过一支工具加工成为可能。(星亿实业 www.sing-yi.com.tw)
Composite tap with a
drill for processing holes built onto the tip
of the forming tap，Exclusively used for through
holes．Drilling，chamfering and tapping can thus
be performed with a single tool． |
|
